TP-Link AX3000 WiFi 6 Range Extender | PCMag Editor’s Choice | Dual-Band Wireless Repeater w/Ethernet Port | Up to 2400 Sq. Ft., 64 Devices | Internet Signal Booster | APP Setup | EasyMesh (RE715X)

Amazing Wi-Fi 6 Extender – Solved My Dead Zone Problem!
I bought the TP-Link AX3000 Wi-Fi 6 Range Extender to fix a major issue: one of my rooms had no Ethernet connection and terrible Wi-Fi, and I almost called a handyman to install an Ethernet port in the room. A search online pointed me to the TP-Link AX3000 Wi-Fi 6 Range Extender. This extender solved the problem perfectly! Setting up with the TP-Link Tether app was quick and painless, and within minutes, I had strong, reliable Wi-Fi and a usable Ethernet port in that room. I tested it with my switch and “voila”, it works!The performance has been excellent—fast speeds, smooth streaming, and stable connections with no more dropouts. Even devices that struggled before now work flawlessly. The extender blends right into my Spectrum Wi-Fi 7 network and provides seamless coverage across my home.I also love that it supports Wi-Fi 6 features like 160 MHz channels, which really boost performance, and the Gigabit Ethernet port for my wired devices I needed in my office, is the best thing I have now.Overall, this was exactly what I needed—easy setup, strong signal, and the perfect solution for a room without Ethernet access. Highly recommended!

Good buy
TP-Link AX3000 WiFi 6 Range Extender – works well, easy to set up, no loss in connectivity, captures out 500+ download and upload speeds.

Very pleased with the performance of this extender. Works great with an AX5400
I wanted to increase the WiFi coverage in my house, and this extender does a really good job of that! My router is a TP-Link AX5400 (Archer AX73), and is “EasyMesh” compatible. I tried using other less expensive (aka “cheaper”) WiFi extenders, and I got what I paid for. TP-Link recommends this particular extender (the RE815X), and it works great. Setup was a very easy – Plug in the extender while it’s near the router, press the WPS buttons on both devices. They link up, and you’re good to go. Move the extender to where you want it, check that the signal light indicates it’s receiving an acceptable signal, and that’s it. The router and extender together use a third 5GHz radio to communicate with each other, and the extender essentially extends both the 2.4GHz and the 5GHz band so that BOTH bands get an extended signal. The end result is like having two routers. As for the size of the extender, it’s larger than a dual outlet wall plate. I put mine in an unused outlet (imagine that!) under the counter in the kitchen. I put my router in one corner of the house floorplan, and I put the extender in the opposite diagonal corner. I now have better coverage for all my smart home and IOT devices. Devices on the second floor now get a 5GHz connection where they only had coverage for a 2.4GHz before. The signal is strong enough to reach Alexa devices in the backyard. The signal strength for my Ring cameras has improved with the addition of this extender. If I could change just one thing about it, it would be that the connected device names show up in the management interface of the extender. The router will identify all the devices connected to the network and show the name, MAC address, and DHCP assigned IP. The extender shows the devices that are connecting to the network using the extender, but the it (the extender) only shows the MAC address and IP of the devices, and not the name. This would be a “nice-to-have”, but isn’t a “show-stopper” for me. Overall, I’m very pleased with this product and I would recommend it. It might be seen as a little “pricey”, but I think the overall value is well worth the cost. I have no regrets buying it.

As they mentioned.

Excelente, ahora si tengo internet en toda la casa; llegó en perfectas condiciones 🤩