EverNary Wireless Caregiver Pager Motion Sensor Alarm Indoor Room Bed Alarms and Fall Prevention for Home/Elderly/Dementia and Kids (1 Plug-in Receiver and 1 Motion Sensor)
$25.00
Product description
Evernary Motion Sensor Alarm, Bed Alarms and Fall Prevention for Elderly
Monitor motion with Ease
A motion sensor alarm is essential for caregiver. The Wireless Motion Sensor and Pager allows the caregiver freedom to monitor the slightest of movement remotely.
Motion Sensor: The motion sensor activates when movement occurs within 16.4ft range x 110°. This transmits a signal to the plug-in receiver and alerts you with a ringtone.
Wireless Plug-in Receiver: Just plug the receiver into any standard 110V outlet. Unique Ringtones with Volume Level, you can personalize your bell with 58 unique ringtones and 5 volume levels.
Built-in LED Indicator: The receiver and transmitter feature LED indicators that create visual alerts for the hearing impaired.
Friendly Reminder: The motion detector is affected by temperature changes. So do not point it at the air conditioning vents to avoid false alarms.
Motion Sensor Alarm Detector Widely Used in Kinds of Occation
Bed Alarms and Fall Prevention for Elderly Seniors
The receiver can be plugged into bedroom, kitchen or living room, etc.
The sensor is placed along the bedside of the person with special needs. While the person moves, the sensor will alert the caregiver in no time.
Safety and Security for Home
You can be alerted if your child who likes to sneak out of the house.
Wireless Garage Door Alarm
As a motion detector if you want to know when someone’s in your garage!
Great for Announcing Visitors
You got this motion detector to give your an audible warning whenever someone approaches your front door.
Characteristic
58 Ringtones and LED Inditactor
The receiver has 58 tunes ensures you will be able to find something you like.
In addition, the built-in 40 mm stereo speaker delivers clear and well-balanced sound up to 110 dB, ideal for helping even senior citizens notice when someone passing the detector.
Mute Mode
The pager has a mute mode to choose from, don’t worry ringtone will disturb a sleeping baby. Thanks to the LED will still flash when working in mute mode, you will never miss a reminder even in mute mode.
Long Working Distance
Motion Detector Security Sensor detects movement within 16.4ft range x 110°.
It transmits the signal to receivers within the 500ft/150m in open area.And 50~120ft with walls and doors.
How to Change the Ringtone or Pair a Receiver with a Transmitter
Step1: Select your favorite music
Plug the receiver into a standard 110V socket.Short Press the music button to select your favorite music.Please Note: Don’t Press and Hold the music button for about more than 5s,otherwise all settings will be cleared.
Step2: Enter Pairing State
Method1: Press and hold the volume button for about 5s until the receiver make a “ding” sound and the LED flashes once.Method2: Press the music and volume buttons at the same time, the receiver make a “ding” sound and the LED flashes once.Please Note: Short Press the Volume button to adjust the volume level.
Step3: Activate the transmitter
Quickly activate the transmitter in 5s to send a signal to the receiver.
How to activate the transmitter:
Wave your hand in front of the motion sensor’s detector until blue indicator lights up.
Step 4
When the pairing (ringtone sync) is successful, active the transmitter again, the receiver will play the selected ringtone automatically.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.4 out of 5 stars 329
4.4 out of 5 stars 329
4.2 out of 5 stars 145
4.3 out of 5 stars 55
4.4 out of 5 stars 832
4.4 out of 5 stars 832
Price
$32.99$32.99 $33.99$33.99 $40.99$40.99 $56.99$56.99 $35.14$35.14 $19.99$19.99
Volume Level
5 Volume Level 5 Volume Level 5 Volume Level 5 Volume Level 4 or 5 Volume Level 4 Volume Level
Power Supply
AC for receiver; alkaline battery or Micro USB for motion sensor AC for receiver; alkaline battery or Micro USB for motion sensor AC for receiver; alkaline battery or Micro USB for motion sensor AC for receiver; alkaline battery or Micro USB for motion sensor 1 Plug-in receiver and 1 Vibration pager (alkaline battery); CR2016 for SOS Button Alkaline battery for vibration pager ; CR2016 for SOS Button
Wireless Caregiver Pager include 1 Plug-in Pager and 1 Motion Sensor. Signals connected receivers if/when motion is detected.Allows caregiver freedom to monitor movement remotely.
Motion Detector Security Sensor detects movement within 16.4ft range x 110°. Please test whether the detection range is appropriate before fixing.It transmits the signal to receivers within the 500ft/150m in open area and 10~50m indoor. It with optional adjustable mounting bracket.
Visual and Sound Alerts: When the sensor is engaged, the LED light indicator flashes to perform a visual alert. It’s a great visual indicator when you are listening to music or for the hearing impaired. You can personalize your receivers with 58 unique ringtones and 5 volume levels (0-110dB), short press the volume button can adjust volume level.
Easy Installation: EverNary Wireless Monitor Sensor is battery (also can use USB cable) operated for fast and easy use. Each receiver can be paired with up to 20 transmitters. Each transmitter can be paired with up to 20 receivers.
Wide Usage: Use as Entry Alert for home/Business.It also can be used at the front door, back door, mailbox, garage and driveway.
10 reviews for EverNary Wireless Caregiver Pager Motion Sensor Alarm Indoor Room Bed Alarms and Fall Prevention for Home/Elderly/Dementia and Kids (1 Plug-in Receiver and 1 Motion Sensor)
Fast, Reliable, and Convenient
Enjoy seamless delivery with Amazon Store. Whether you're shopping for everyday essentials, electronics, fashion, or gifts, your order is delivered straight to your door—fast and hassle-free. With options like Standard Delivery, Express Shipping, and even Same-Day Delivery in select areas, Amazon makes it easier than ever to get what you need when you need it.
Pete –
Life Saver for Someone you LOVE who has Dementia!
I write very, very few reviews; but I’m making an exception with this product. It actually works and works great. I highly recommend these simple alarms. I have four of them, all of which are the plug-in kind with batteries for the motion detector. My wife of 56+ years has late-stage Alzheimer’s disease. The first one I bought wakes me when my wife gets out of bed. Part of the reasoning for that is she broke her hip a couple years ago and had to have a total hip replacement. I don’t want her to fall again.The receiver (the plug-in part) is connected to a power strip which is fastened to the bed post with a couple of zip ties just above my head. That close to your head, it will just about wake the dead, which I need when I’m asleep. The power strip has a switch with a red light that I can easily turn off to silence the alarm. The red light lets me know it’s on with a glance, even in the dark.The battery operated motion detector (transmitter) is simply sitting on the carpet on her side, underneath the bed. I’ve had it a little over a year and only had to change the batteries one time, just recently. When they need replacing, the alarm sounds and stays on without motion, suggesting something is wrong. When I replaced the batteries it worked again, just like new.Since I bought the first alarm, I’ve purchased them three more times to give me peace of mind when my wife moves about the house. One is sitting on the floor beside the front door to let me know she’s there. They help me keep track of where she is, but by themselves, they’re not fail safe. I’ll explain later below…The picture with three receivers plugged into an outlet is in the hall just outside our bedroom door. The left receiver is for the indoor motion detector that sits on the floor just inside the front door. The one on the right is for the motion detector (transmitter) on the back porch. The middle receiver is for the exterior motion detector on the front porch just above the door. Each alarm each has up to 50 different alarm sounds that can be customized to help you distinguish which alarm is sounding. Some tunes are kind of ‘cheesy,’ but most of them are quite good. I chose a police siren for that one to distinguish it from the other two alarms which have similar, but not the same tunes. I can hear them from most areas in the house.The other two motion detectors are actually mounted to exterior walls: One, above the front door under a covered porch. The other is mounted on the exterior wall above the sliding glass doors on the back porch. Both of them are protected from rain by the porches. if you decide to buy one, you’ll notice that the included directions are not written very clearly. And, they’re written in tiny mice type. I wrote and rewrote them through much trial and error which I included below.I said earlier that these are not fail-safe devices. Because of that and the fact that my wife “escaped” several times before I had our home somewhat “dementia proofed”. I did this by adding another security device inside, near the top of the front door. I finally have some peace and a sense of security. There is also a picture of it on the inside of the front door. It’s also from Amazon (see link below), costs less than $15 including tax. It’s easily installed; it works great, and my wife cannot understand how to open it. It’s simple to open for normal people and would also make a good security device for people in apartments, etc. It can be installed on either a right-hand or a left-hand exterior door that swings inward like ours does in the picture. I think it’s a must have for a loved one with dementia that’s prone to wander or has “sundowners” symptoms that are prevalent with Alzheimer’s. I very highly recommend this product as a potential life saving device.Link for door security device —https://www.amazon.com/dp/B07DR9CMGZ?ref=ppx_yo2ov_dt_b_product_details&th=1Pairing the Receiver & TransmitterPlug the receiver into an electrical outlet and set the transmitter on the floor near the outlet pointed away from you so you can easily activate it in step 4 below…1. Make sure the Motion Detector Transmitter is ON and pointed away from you. (the smaller battery-operated unit)2. Set the Receiver ringtone by plugging it into an outlet and short pressing the lower button until you find the tune you prefer. Deciding which tune to use is the only hard part…3. To activate Pairing Mode, Press and HOLD the Receiver Volume (upper button) for 5 seconds until it sounds and the LED’s begin flashing.4. Complete Pairing by waving your hand in front of the motion detector within 5 seconds.5. When Pairing is successful the unit will activate the new Receiver ringtone whenever motion is detected by the Transmitter. (There is a 5 second delay between activations; but this can be changed to immediate within the Transmitter)
luiwk –
Great detector and receiver with on/off switches and a short alarm
This motion detector and receiver work great! The features I needed were: 1. The sensor and monitor each have an on/off switch 2. The monitor only rings once when the detector is triggered. The detector works like I expect it to. Other monitors I tried ring for at least 10-15 seconds after the sensor is triggered, and there’s no on/off switch to stop it. If you need a longer alarm, this device is not for you. I use the detector under the bed of an elderly family member to alert me when they step out of bed at night. I do not want an alarm going off for 10-15 seconds in the middle of the night. The detector and receiver run on batteries, or you can use their USB ports to plug each into a separate outlet. (My receiver is not a plug-in receiver.) At the lowest volume setting, the receiver vibrates with no sound, but you still get the visual alert with the LED lights.
k porter –
Perfect to for Alert Movement of Elderly/Seniors!
This was perfect for what we needed! We needed something to alert us if mom was trying to get out of bed to walk because she is very wobbly-especially at night. This fit the bill! It is inexpensive and easy to plug in and start working. We put the alarm in the den, and the motion detector just under the edge of her bedside stand. It works like a charm. The bell alarm is in another room so it doesn’t startle her, and is loud enough to alert us that she’s on the move.
matteo –
Works well, but some bad design decisions
This works well, but be aware, the battery powered remote version has no way to plug it in, so by ordering battery version you’re committed. Also, no on/off switch which compounds the problem.Another issue: the ringtone/volume adjustments are somewhat badly designed.There are two sets of buttons on the remote. The bottom one, an up/down switch, moves through a bunch of different ringtones, and the other one rotates through no volume to full volume, in 4 steps. Unfotunately, it is really easy to touch the ringtone toggle and switch ringtones. Seems like you’d want to set it once and then not mess with it, so having such an easy to press button for this function encourages constant accidental changes. The other, more problematic issue is that there is not much choice at the lower sound levels- you have silent, sort of loud, pretty loud, and very loud. it would be better if there were more than 4 volume options, and therefore more choice at the bottom end of the volume scale.That being said, it works well, and is very helpful, and I’ve found that if you keep the remote face down on a piece of fabric, it muffles the sound somewhat, making a slightly lower lowest volume.
Grace Williams –
Doesn’t work awesome in the dark.
I bought this for the purpose of using for my overnights. Just letting you know that that is not the intended purpose for this specific product. All through the night it would go off while my client was sound asleep, and i mean ALL NIGHT… seriously. So if your thought is to use this day-time and night-time, I recommend you try something else. That being said, it works excellent for day-time!! The additional choice of how far you want the sensors to reach is a wonderful touch!! Loved this product for day-time use! NOT GOOD NIGHT VISION.
HaiderJay –
Great product that fulfilled the need to be alerted when my elderly father got up. Unfortunately, after continously using it for 3 months, the alarm has stopped working. The motion sensor lights up but no alarm. Changed batteries to no avail. Checking the alarm by changing volume indicates it’s fine itself. Seems like no signal is being transferred between the 2 devices. Great product but didn’t last.Edit: Turns out that the alarm stops working before the batteries die.. changed the batteries in both devices and it works fine
Linda Herrera –
Lo compré para alertarme cuando mi madre que cuido por las noches se lavanta al baño y poder ayudarle… es una excelente alarma… funciona perfecto, tiene amplio rango de visión, por lo que debes colocarla muy estrategicamente abajo para que no suene si se mueve en la cama, que suene solo si baja los pies de ella.
Amazon Customer –
I have ordered numerous of these as they are phenomenal to help minimize falls.We use in our memory care unit for those who are declining with ambulation. We find it much more useful then a bed alarm.
Alain Gosselin –
Easy to setup and works very well
This Came without the shorts and is very big!! –
Got this for my mom with advanced dementia and it works great to let me know when she’s up or trying to get out of bed… the alarm( loudness can be adjusted)is gentle so it doesn’t startle me yet enough to alert me she’s up