BrosTrend AX1500 WiFi 6 Universal WiFi to Ethernet Adapter with RJ45 Gigabit Port, Dual Band WiFi Bridge for PC, Printer, Smart TV, Blu-Ray Player, PlayStation, DVR, etc. Wireless to Wired Convert

Takes a wifi signal and turns it into a very good ethernet hard wired signal that works very fast
Excellent unit works perfectly. Delivered on time

It just works
I’ve been using this device for just a short time, but more importantly it was easy to set up and start using. I used the local wifi built in to the adapter to configure it. One thing, after making all of the selections, when I clicked “Apply”, nothing happened. Used the “back” control to start over and the second time it took. Plugged in a laptop into the ethernet port and it was configured within seconds. No noticeable degradation in performance either. I chose this as I needed a way to physically connect to my home network from my workbench, so instead of running cable through my attic and cutting holes in the sheetrock I chose this option. (Note: I rarely give a 5 star rating for anything, so judge accordingly.)

Don’t waste your time or money.
I don’t like doing negative reviews, but Good Luck with this!I can’t explain the Great Reviews but this has been a real disappointment to me. I needed to connect a Snom PA1 to a customers PA System and the wiring was in a closet with no ethernet drop. This seemed to be the solution. I plugged it in at the Customer’s site and connected it to their WiFi by WPS. Moved it to the permanent location in the closet and it had a very strong signal. The Snom device is POE so I connected the BrosTrend to the LAN side of POE power supply and the POE side to the Snom. The Snom came up but could not get a DHCP address. I assigned it a static IP address, and I could then get to it via web browser for configuration but it never would show in the BrosTrend management interface as a client device and Angry IP Scanner Showed the IP address of the Snom device as having the same MAC Address and MAC Vender as the BrosTrend. Even though I could get to the management interface of the Snom, it wouldn’t register in the cloud management portal so this is 100% useless to me.BTW, this narrative is the extremely condensed version, I spent a lot of time and trips to the customer site to try to make this workPros;Nice Form FactorNice management interfaceEasily connected to WiFiReasonably pricedSeems to have a nice feature setCons;Did not work as advertised.

Ok Extender Not a Great Bridge
I bought this solely to use as a WiFi to Ethernet bridge to feed my firewall and existing wired network as I recently upgraded to ATT fiber and they had to install the modem on the other side of the house. I found the features and stability to be less than par. I have a fairly complex setup and needed the device to do one thing. The device only has 2 modes, Extender and Access Point. I had no intention of using this device as an extender but there was no way to turn it off. Also, when I set a static IP address, the device was very unstable and kept rebooting. If left on DHCP, it would work and I’d get decent speeds from the ethernet port but the extra WiFi was adding too much congestion and caused much slower WiFi speeds from my Access Points.Overall, this device did not work for my setup. I went back to an older Netgear router with openWRT and was able to make my setup work much better.If you are only looking for a wireless extender for a simple network, this would probably be fine. Or as a very simple access point although the built in plug makes placement a little inconvenient for an AP in my opinion.

ik zocht naar een Bridge die het huidige wifi signaal kon ontvangen van mijn accespoint (tplink eap650) . De Brostrend voorziet nu een betaalterminal die in mijn zaak staat die enkel kan verboden worden via utp kabel. Binnen de 3 minuten geïnstalleerd.

Super easy to set, works a treat. Very pleased

Einfach zu installieren und läuft ohne Störungen.